After normal use, the horizontal bead mill will produce damaged parts like all machinery, These normal damaged parts are called wear parts. The occurrence of these conditions has been taken into account in the design of the horizontal bead mill, so the design of ELE engineers is also based on the principle of reducing maintenance or replacement costs. So, what are the wearing parts of the horizontal bead mill? There are three main wearing parts: one is seals, the other is wear parts, and the third is fatigue parts.

Let me talk about sealing first. Seals are divided into static seals and dynamic seals. The static seals are mainly O-rings. It depends on the type of material solvent, the frequency of disassembly and assembly, and the use time. Generally, it is recommended to be between six months and one year. Check or replace once. The dynamic seal is the mechanical seal that is often referred to. It can basically be used for more than three years or longer under normal working conditions, but it needs frequent maintenance, such as replacing the coolant. For details, please refer to the instruction manual.

The other type is wear parts, mainly the rotor in the grinding cavity, especially the rod pins. Due to the hardness of the grinding medium and the material particles, the wear condition will be different. This needs to be opened regularly for inspection. There is also the discharge filter. It is recommended to replace it regularly for about 10-15 months depending on the grinding frequency. Do not wait for the beads to leak before replacing it, otherwise it will be more troublesome to wait for the beads to leak into the material before processing.

Finally, there are fatigue parts, one is the belt of the transmission, and the other is the diaphragm of the diaphragm pump. It is recommended to replace it once every two years. It can be used as a common spare part, and it can be purchased as a spare when choosing ELE Bead mill.

At present, ELE bead mills have users in many countries around the world, and after-sales teams are all over the world. The earliest used ELE sand mill has been in operation for 26 years and is still working today. In fact, there are not many wearing parts of ELE Bead mill, and the maintenance cost is also very low in the industry. The accessories are available from stock for many years, and the timeliness is guaranteed. When in use, as long as you refer to the manual for reasonable operation and timely maintenance work, contact ELE Company for repair in time if there is a failure, then your sand mill will always work normally.